Pleora Technologies

Pleora offers a complete portfolio of Gigabit Ethernet (GigE)-based video interface products for integration into high-performance vision systems that all work seamlessly together using the GigE Vision® and GenICam™ standards. 

Learn more about how Pleora can help you optimize the design and performance of vision systems by exploring our product lines below.

Products
Embedded Video Interfaces External Frame Grabbers
eBUS SDK Transcoder Gateway
Professional Services Image Sensor Evaluation

 

 

Technical Support Request Form

Please note that if you are already a registered Pleora Support Center user, this form is not for you. Registered users have access to "My Support," where cases can be easily submitted and tracked. If you'd like to become a registered user right now, simply click here.

 

 

Products

Pleora CMOSIS CSI2100 Sensor Evaluation Kit

  • Fully integrated system includes:
    • Pleora Technologies NTx-U3 Embedded Video Interface – no PCIe frame grabber required
    • CMOSIS CSI2100 Image Sensor
    • F-mount lens holder with dust cap
    • Nikon Nikkor AF F-mount lens
    • Easy to use software interface including the Pleora Technologies eBUS SDK
  • Supports Microsoft Windows 7 and 8 (32 and 64-bit)
  • GenICam interface for accessing and programming all image sensor registers
  • Slider controls for gain, offset, and clipping
  • Image display with zoom and pan  and analysis including histogram, ROI, mean, and standard deviation
  • Monitoring functions including temperature, frame rate, and bandwidth
  • Image acquisition with internal or external exposure control
  • GPIO for external exposure and lighting strobe control
  • Delay and duration controls for exposure and lighting strobe
  • Displayed images and video can be recorded to raw TIFF, BMP, or H.264 MP4 files
  • Test points for hardware and image sensor monitoring
  • Hardware and firmware reference designs available from Pleora Technologies using Altera Cyclone® V and Arria® V GX FPGAs

 

Pleora eBUS™ SDK

  • Compliant with GigE Vision 2.0, 1.2, 1.1 and 1.0, 1.1
  • Compliant with USB3 Vision 1.0
  • Compliant with GenICam 2.3.1, and earlier 
  • DirectShow filter, to enable easy integration of GigE Vision and USB3 Vision cameras with image display, analysis, and compression filters in the DirectShow ecosystem
  • User interface controls for high-performance display
  • Receives and transmits image streams from a single API
  • Comprehensive set of sample code and documentation
  • Extensive rebranding and repackaging capabilities
  • Works seamlessly with Pleora’s external frame grabbers and embedded video interface hardware, as well as third-party products compliant with GigE Vision, USB3 Vision, and GenICam

 

Pleora GigE Vision over NBASE-T Development Kit

  • Transmit uncompressed high-bandwidth GigE Vision-compliant images at speeds up to 5 Gb/s over low-cost Cat 5e cabling for distances up to 100 meters
  • GigE Vision 2.0 compliant
  • GenICam compliant interface for easy accessing and programming features
  • Kit includes Aquantia NBASE-T PHY, Xilinx Artix-7 FPGA, 1 GB DDR3 frame buffer to accommodate multi-mega pixel sensor sizes, Camera Link Adapter board for easy hardware interfacing, Pleora Technologies eBUS SDK, AutoGen XML generation tool, and a firmware reference design
  • 96-bit 120 MHz parallel LVTTL/LVCMOS video input
  • Supports select 1, 2, 4, 8, and 10 tap geometries
  • Line scan and area scan modes
  • GPIO with 500 V isolation for external trigger/exposure and lighting strobe control
  • Supports Microsoft Windows 7, 8.1, and 10 (32 and 64-bit), Linux, and OSX
  • Updateable firmware via the NBASE-T port for easy feature upgrades in the field
  • Hardware Reference Design and IP Core Package available from Pleora Technologies

 

 

Pleora iPORT Analog-Pro External Frame Grabbers

  •  Transmits two independent channels of analog composite video over GigE with low, consistent latency
  •  Built-in de-interlacing algorithms
  •  Supports square pixels
  •  RS-232 and GPIO to control external devices
  •  Available as enclosed units and OEM board sets

 

Pleora iPORT CL-GigE External Frame Grabbers

  • Transmits video from Camera Link Base cameras over GigE
  • Extended operating temperature range of -40°C to +60°C
  • Plugs into a wide range of computing platforms without needing a PCI frame grabber
  • Compact and low power
  • Screw surface mountable enclosure
  • Line scan and area scan modes
  • 120 MB frame buffer to accommodate multi-mega pixel sensor sizes
  • Record and playback capability
  • GigE Vision and GenICam compatible
  • Supports IEEE 1588 Precision Time Protocol and action commands
  • Supports both PoE and externally-powered options
  • Power over Camera Link (PoCL)
  • Sophisticated on-board programmable logic controller (PLC) allows users to precisely measure, synchronize, trigger, and control the operation of other vision system elements
  • Low, predictable latency
  • Bundled with Pleora’s feature-rich eBUS™ SDK application Toolkit
  • Fully supported by a comprehensive development kit

 

Pleora iPORT CL-Ten External Frame Grabbers

  • Transmits video from Camera Link cameras over 10 GigE with low, consistent latency
  • Product options for designers to meet system requirements:
    • iPORT CL-Ten Full supports transmission from a single Full (including Deca and 80-bit) mode camera
    • iPORT CL-Ten Dual Medium supports simultaneous transmission of 2 Medium or Base mode cameras
  • Provides power to cameras utilizing the Power over Camera Link (PoCL) standard
  • Built-in PLC for advanced real-time synchronization and triggering
  • RS-232 and GPIO to control external devices

 

Pleora iPORT CL-U3 External Frame Grabbers

  • Transmits video from Camera Link Base or Medium mode cameras over USB 3.0, with low, predictable latency
  • Plugs into a wide range of computing platforms without needing a PCI/PCIe frame grabber
  • Compact and low power
  • Mountable enclosure
  • Line scan and area scan modes
  • 120 MB frame buffer to accommodate multi-mega pixel sensor sizes
  • Throughput approaching 3 Gb/s
  • Record and playback functionality
  • USB3 Vision and GenICam compatible
  • Power, control, and video over the same USB 3.0 cable
  • Power over Camera Link (PoCL) with models CL-U3B-IND and CL-U3M-IND (external power supply required)
  • Sophisticated on-board programmable logic controller (PLC) allows users to precisely measure, synchronize, trigger, and control the operation of other vision system elements

 

Pleora iPORT HDSDI-U3 External Frame Grabbers

  • Transmits video from HD-SDI equipment over USB 3.0, with low, predictable latency
  • Plugs into a wide range of computing platforms without needing a PCI/PCIe frame grabber
  • Compact and low power
  • Mountable enclosure
  • 120 MB frame buffer
  • Record and playback functionality
  • USB3 Vision and GenICam compatible
  • Power, control, and video over the same USB 3.0 cable
  • Bundled with Pleora’s feature-rich eBUS™ SDK application toolkit

 

Pleora iPORT NTx-GigE Embedded Video Interface

  • Compact and low power
  • GigE Vision and GenICam compliant
  • Throughput approaching 1 Gb/s
  • Up to 32-bit, 120 MHz parallel LVTTL/LVCMOS video input, and 4 interleaved taps
  • Line scan and area scan modes
  • 120 MB frame buffer to accommodate multi-mega pixel sensor sizes
  • Supports both POE and external-powered options
  • Updateable firmware via the GigE port for easy upgrades in the field

 

Pleora iPORT NTx-GigE Intellectual Property

The iPORT NTx-GigE IP Core Package contains:
  • Pleora's encrypted IP core for a GigE Vision compliant video interface
  • Quartus II or Vivado project files
  • Top-level FPGA interconnect
  • Qsys or IPI systems
  • A Gigabit Ethernet Media Access Controller (MAC); and
  • Device configuration scripts, which facilitate automation of the programming process during production.

 

Pleora iPORT NTx-Mini Embedded Video Interface

  • Compact and low power
  • GigE Vision and GenICam compliant
  • Throughput up to GigE’s full 1 Gb/s rate
  • Up to 24-bit, 90 MHz parallel LVTTL/LVCMOS video input, and 2 interleaved taps
  • Line scan and area scan modes
  • 32 MB frame buffer for store-and-forward applications
  • Updateable firmware via the GigE port for ease of manufacturing and feature upgrades in the field

 

Pleora iPORT NTx-NBT Embedded Video Interface

  • Transmit uncompressed high-bandwidth GigE Vision-compliant images at speeds up to 5 Gb/s over low-cost Cat 5e cabling for distances up to 100 meters
  • GigE Vision 2.0 compliant
  • GenICam compliant interface for easy accessing and programming features
  • 1 GB DDR3 frame buffer to accommodate multi-mega pixel images
  • 24-bit, 120 MHz parallel LVTTL/LVCMOS, or up to 15 LVDS pairs
  • Supports select geometries up to 8 taps
  • Line scan and area scan modes
  • Updateable firmware via the NBASE-T port for easy feature upgrades in the field

 

Pages