-
The compact design of the DL2230 is easy to integrate into machine vision applications that require a space saving lighting design.
-
The housing of this Extra Small Dome Light has an outer dimension of 2.83” (71.9mm) and an inner, working diameter of 1.95” (49.5mm).
Imaging/Machine Vision
Download Line Card
Document
Products
-
The DL225 series of square coaxial lights features a modular heat sink and circuit design for enhanced performance, product availability and lead time.
-
These coaxial lights are available in a wide variety of wavelengths from UV to IR.
-
They provide intensities from 18kLux for the DL225-025 to approximately 50kLux for the larger models
-
For applications requiring power cables longer than the standard 2 meters provided with Ai lights.
-
Standard cable lengths are 3, 5, 9 and 15 meters.
-
Back-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects.
-
Two aperture diameters are available, .88” (22.3mm) and 1.75” (44.5mm).
-
For similar performance in a thinner housing, refer to our Edge-lit Flat Diffuse Lights (FX Series).
-
Available in visible and infrared wavelengths with an optional polarizer.
-
Provides light intensities of up to 11.7kLux at 4” (102mm) standoff.
-
Pre-engineered, expandable sizes are available from 3”x 3” (76mm) to 22”x 34” (559 x 864mm) in 1” (25mm) increments.
-
Edge-lit Flat Diffuse Lights provide a space saving design for the illumination of highly reflective objects.
-
Custom aperture diameters are available from ¼” to 3” (6.4 to 76mm) in ¼” increments.
-
Contained within a thinner housing than our Back-lit Flat Diffuse Lights (FD Series)
-
Available in visible and infrared wavelengths.
-
Provides light intensities of up to 9.2kLux at 4” (102mm) standoff.
-
Pre-engineered, expandable sizes are available from 3”x 3” (76mm) to 24”x 24” (610mm) in 1” (25mm) increments.
-
This series comes with LB111 Mounting Brackets.
- The fourth generation of Ai’s popular Inline Control System.
- High Output Power: Capable of delivering 2.1 amps of continuous output and up to 8 amps in overdrive strobe at 24V, outperforming all other inline controllers on the market.
- Compact & Rugged: Sleek enough to fit through wiring conduit with its compact anodized aluminum housing and sealed to IP68 standards for prolonged liquid immersion and complete dust protection.
- Plug-and-Play Functionality: Enabled with SignaTech™, allowing for simplicity when overdriving, without risk of damage to the lighthead.
-
The I3 and I3S Inline Controllers provide overdrive strobe and continuous operation to lights from a small package when larger, more versatile external controllers are not necessary.
-
Switching between continuous-on, gating on/off and strobe overdrive is seamless. The I3 and I3S employ Ai’s exclusive Adaptive OverdriveTM that optimizes strobe power regardless of input Pulse Width.
-
The I3 is a default-on device on power-up, whereas the I3S is a default-off device, requiring a trigger to illuminate.
-
All ICS models employ reverse input polarity protection.
-
Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time.
-
A wash down version of all ICS drivers is provided automatically with any wash down light to which it is attached.
-
0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.
-
The IC Inline Controller (ICS 2.0) provides steady and optimal current to lights from a small package when larger, more versatile discrete controllers are not necessary.
-
The IC provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming.
-
All ICS models employ reverse input polarity protection.
-
A wash down version is provided with any light to which it is attached is also wash down.
-
0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.