Abaco Systems (formerly GE Intelligent Platforms)

For 12 years, we were the embedded computing business of GE Intelligent Platforms - itself formed from a series fo acquisitions of market-leading embedded computing companies. 

The entire GE Intelligent Platforms team, around 700 people - made the transition from GE, meaning that our customers continue to deal with people with whom they've had relationships for years and in some cases, decades. 

Also making the transition from Ge are the robust, repeatable business processes for which the company is renowned - but these are now finely-tuned to the specific needs of our embedded computing customers.

We have brought with us from GE an absolute, all-overriding commitment to ethics. That commitment is fundamental and central to all our interactions with you. Trust is paramount to all our relationships. 

Abaco Systems products and solutions can be found in many high profile military/aerospace sea, land and air programs, as well as in commercial and industrial organizations in which rugged reliability is mission-critical. 

Abaco Systems is a global leader in open architecture rugged embedded systems. Spun out of GE in 2015 we combine the attitude and customer focus of a startup with 30 years of experience delivering rugged embedded computing products and solutions. 

 

I need help with my Abaco product.

Our technical experts are ready to help. our Technical Support organization can be reached as follows: 

Americas customers

T: 1-800-322-3616
EMEA customers

T: +44-1327-322760
Asia Pacific/Oceania

T: +81-3-55443973
Special Avionics I/O customer hotline
T: 1-805-883-6097
Email: suppport@abaco.com

 

 

 

 

 

 

 

 

Tweets by @abacosys

 

 

 

 

 

Products

Abaco 5918 MMS, Carrier - Modular Micro Mezzanine System™ PMC Form Factor, Conduction-cooled Cyclone III FPGA, 16K Logic Elements (RoHS Compliant, Lead Free)

  • Conduction-cooled ECM carrier (complies with VITA 20)
  • 32 bit 66 MHz PCI interface
  • 3.3V or 5V PCI interface
  • PLX PCI9056 PCI to 32-bit local bus interface
  • Supports PCI Target, Master, or DMA
  • Altera Cyclone III FPGA 8Kb Memories, 18x18 Multipliers, PLL Support
  • EP3C16F484I7N with 16K Logic Elements (with configuration options for 40K and 120K LEs)
  • Supports Nios Processor
  • Easily configurable using Quartus and SoPC Builder
  • Four ECM sites
  • Configure FPGA by serial FLASH, PCI or JTAG
  • Rear I/O only
  • Two status LEDs
  • Industrial temperature
  • RoHS compliant

 

 

Abaco 6U OpenVPX CUDA Starter Kit - CUDA6USK1 - includes 19" starter cage, SBC, and three GPUs

  • 4-slot 6U OpenVPX chassis with 6U VITA 46 OpenVPX uncommitted backplane
  • Four rotary hard disk drives
  • ATX Power Supply
  • Variable speed cooling fans w/ adjustable forced air cooling
  • Four 6U Pay Load Slots
  • IEEE Std. 1101.10 compliant card frame
  • 650W power-factor-corrected auto-ranging PSU
  • Primary power switch
  • System reset switch
  • Rack mountable

 

Abaco 6U OpenVPX HPEC Starter System

  • Fully integrated and tested 64bit Linux Beowulf cluster
  • Head node configured with full Human Machine Interface (HMI) for native development
  • AXIS SW pre-installed and configured
  • 8 x Intel 2nd Gen Quad Core i7 CPUs
  • Fully managed ethernet SFM
  • 10GigE Data plane
  • GigE control plane
  • 2 x HDDs
  • 1200Watt PSU
  • User I/O via DSP280RTMs
  • Optional Network I/O via GBX460RTM
  • Rear transition modules (RTMs) provide access to payload processor interfaces
  • Additional Backplane options available

 

Abaco 800 VME64 to VME64 bus-to-bus adapter with DMA

  • Bi-directional bus mastership
  • Memory and I/O mapping
  • Streamlined no-protocol connectivity
  • Controller Mode DMA: 70 MB/s

 

Abaco 810 VME64 to PCI bus-to-bus adapter with DMA

  • Memory and I/O mapping
  • Controller Mode DMA: 70 MB/s
  • Streamlined no-protocol connectivity
  • Bi-directional bus mastership

 

Abaco 820 VME64 to PMC bus-to-bus adapter with DMA

  • Streamlined no-protocol connectivity
  • Bi-directional bus mastership
  • Memory and I/O mapping
  • Controller Mode DMA: 70 MB/s

 

Abaco ACC-5595 2 Gb/s Reflective Memory Hub Assembly

  • Provides up to eight ports using small form factor pluggable (SFP) transceivers
  • Hub assemblies can be cascaded with a maximum of 256 nodes
  • Automatically bypasses defective or disconnected nodes in a fiber-optic network
  • Automatic bypass can be optional controlled by the loss of signal or by the loss of sync pattern
  • Each port regenerates the serial optical signal, eliminating link losses and reducing jitter
  • Configurable for use with cables up to 10 km in length
  • 10BaseT Ethernet TCP/IP port for remote access and control
  • RS232 port for local access and control
  • Optional 19-inch 1U rack mount or desktop enclosure
  • Internal universal power supply
  • Dark on Dark option turns off the boards transmitter if the receiver does not detect a signal (available for firmware versions 02.00 and later)

 

Abaco ACC-BT01 Dual 64-pin Transition Panel

The ACC-BT01 provides a compact, cost-effective transition between field wiring and Abaco Systems Embedded System I/O boards. Lift clamp-style terminal blocks are provided for attachment of field wiring, while two 64-pin DIN connectors are provided for connection to I/O boards.

 

Abaco ACC-BT02 Dual 64-pin Transition Panel with Bussed Ground

  • Also, refer to VME-344x and -345x Transition Panels with surge withstand protection
  • Accepts 12-22 AWG wire
  • EIA standard RS-310C 19-inch rack mountable
  • Provides easy-to-use lift clamp terminal blocks
  • Interfaces with most Abaco Systems I/O boards via mass-terminated cables
  • Interconnects Abaco Systems' I/O boards with field wiring

 

Abaco ACC-BT03 Dual 96-pin Transition Panel with Bussed Ground

  • Also, refer to VMIVME-344x and -345x Transition Panels with surge withstand protection
  • EIA standard RS-310C 19-inch rack mountable
  • Provides easy-to-use lift clamp terminal blocks
  • Accepts 12-22 AWG wire
  • Interfaces with most Abaco Systems I/O boards via mass-terminated cables
  • Interconnects Abaco Systems I/O boards with field wiring

 

 

Abaco ACC-BT10 DIN Rail Transition Module for Euro-Din

  • Interfaces with most Abaco Systems I/O boards via mass-terminated cables
  • Fits standard DIN rails
  • Accepts 24 to 12 AWG
  • High-density design reduces cabinet space
  • Provides easy-to-use lift clamp terminal blocks
  • Interconnects Abaco Systems I/O boards with field wiring
  • DIN rail mount (15 or 35 mm)

 

Abaco ACC-BT12 D-Subminiature Adapter Shell for 9-, 15-, and 25-pin Connectors

  • Provides easy-to-use lift clamp terminal blocks
  • Accepts 26 to 14 AWG
  • IEC 807-2DIN 41 652 or MIL-C-24 308 compliant
  • Interconnects field wiring with GE I/O boards

 

Pages